DIY 100-300 WATT ALTERNATOR

MOTOR AND ROTOR ONLY $35 usd.

USA $35 + $12.00 shipping

CANADA $35 + $23.00 shipping

WORLDWIDE $35 + $37.00 shipping

This kit contains :
(1) entire induction AC motor
MAGNETS NOT INCLUDED!
(1) STEEL ROTOR 2" (for double magnet configuration)
DIRECTIONS

READ BEFORE YOU BUY!!!!!!!!!!!! This kit is in the early stages of development. This KIT REQUIRES a general understanding
of how alternators work. You MUST have a DRILL or DRILL PRESS to Drill a hole in the HEX rotor.
Watch both videos before you decide this is for you.
The motor is shipped as a FULLY functioning AC MOTOR not an ALTERNATOR.
The motor is not warrantied as a MOTOR, it is BRAND NEW but old stock.
The steel rotor is for permanent long term usage but requires mounting.
The induction MOTOR ROTOR contains the 3/8" steel rod for the kit.
This must be tapped out if the squirrel cage rotor which is not used.
1" X 1/2" MAGNETS CAN BE PURCHASED ON EBAY OR THE INETERNET
NEVER TEST ALTERNATOR BY HOLDING IT WITH YOUR HAD AS
I DID IN THE VIDEO!!!!! THIS IS DANGEROUS!!
When a load is applied or if you mount incorrectly, the alternator can SPIN
out and cut your hand (TRUST ME:-) MOUNT IT THEN TEST.





ROTOR 1700 RPM MAX-
MAXIMUM OUTPUT, 300 WATTS @1889 RPM
1.3 Amp, INDUCTION MOTOR CONVERSION KIT.



<